Virtual Services Platform 9010 chassis
3. Insert a Phillips screw through each hole on the mounting bracket and chassis.
4. Use a Phillips screwdriver to tighten the screws.
5. Hold the chassis in position and align the flanged end of the mounting bracket with
6. Ensure that the holes on either side of the rack supports match horizontally.
7. Insert a Phillips screw through each hole on the mounting bracket in the screw
8. Use a Phillips screwdriver to tighten the screws.
Attaching the cable management
Use this procedure to attach the cable management brackets and cable management cover
to the top of the Virtual Services Platform 9010 chassis.
50
Installation — Chassis
the holes on either side of the rack support.
positions in the flange and rack.
Comments? infodev@avaya.com
November 2013