Securing The Chassis In A Flush-Mount Configuration - Avaya Virtual Services Platform 9000 Series Installation Manual

Virtual Services Platform 9010 chassis

Securing the chassis in a flush-mount configuration

Mount the Virtual Services Platform 9010 in a standard two-post or four-post equipment rack.
This procedure aligns the chassis front with the rack.
Procedure
1. Hold the chassis in position and align the flanged end of the chassis mounting
2. Ensure that the hole pairs on either side of the rack vertical supports match
3. Insert a Phillips screw through each hole on the mounting bracket in the screw
4. Tighten each screw with a Phillips screwdriver.
48 Installation — Chassis
bracket with the holes on either side of the vertical rack support.
horizontally.
positions in the flange and rack.
Comments? infodev@avaya.com
November 2013