Assembling And Installing Cable Management Brackets - Avaya Virtual Services Platform 9000 Series Installation Manual

Assembling and installing cable management brackets

Use this procedure to install the I/O and power cable brackets. Use these brackets to keep
cable clusters fastened and out of the way but still accessible for maintenance.
About this task
Important:
Do not attach any cables until after the bracket installation.
Procedure
1. Attach the three Z brackets to the vertical cable bracket as shown below using 6 of
Installation — Chassis
the screws provided. Nuts are not required since the Z brackets are already
threaded on one side for connection to the I/O cable bracket using screws alone.
Virtual Services Platform 9012 chassis installation
November 2013 93