Table of Contents
Advertisement
5. SERVICE PROGRAMME
2.Service programme (Incanto classic)
2.1.Test mode
Access:
Access the service mode by turning on the machine and simultaneously pressing the coffee
and hot water buttons.
The various functions indicated in the table can be checked by pressing the button combinations listed
below.
Programme table (functions programme)
Buttons
Powder
coffee
Gears up
x
Unit down
Grinder
Pump
Heating
x
Heating + LED
x
check
* In order for the flow meter pulse to be indicated, the HWS valve must close once again after opening
so that the HWS microswitch re-opens.
If the HWS valve is completely open, the LED combination which lights up provides information on the
flow rate (see table below)
Page 2/18
Exresso button
Coffee button
Powder coffee selector
Hot water button
Descaling button
Alarm indicator light
Filter warning light
Coffee bean container and
dregs drawer indicator light
Water tank and circuit
filling indicator light
Coffee Expresso Hot water
x
x
x
+HWS
REV.1 FEB.2005
INCANTO S-CLASS
Descale
Microswitch status
Powder LED
(MS2)
Expresso LED
(MS1)
Fault LED
(flow meter pulses) *
x
x
+ HWS
Saeco International Group
Advertisement
Table of Contents
