Table of Contents
Advertisement
3. OPERATION
Display indicators
Standby
Descaling
Standby
Fill water tank
Bean less
Ready
Empty the dregs
drawer
Important: The grinds container must only be emptied when the machine is turned on. The
container must be removed for at least 5 sec. If the grinds container is emptied when the machine
is turned off, coffee dispensing will be locked when the machine is turned on.
Brewing unit not
detected
Dregs drawer not
detected
Close doors
Ventilate
Brewing unit locked
Grinder locked
Rinse
Heat
Page 12/21
Press MENU/OK button.
Descale machine.
Fill water tank with fresh drinking water.
Fill coffee beans container and re-start coffee dispensing cycle.
Open the doors, remove the grinds container and empty.
Install brewing unit correctly.
Install drip tray and coffee grinds container correctly.
Close front door.
Prime the circuit (start-up).
Call authorised service centre.
Call authorised service centre.
The machine is in the heating stage; wait until this stage is
complete.
REV.1 FEB.2005
INCANTO S-CLASS
Saeco International Group
Advertisement
Table of Contents
