Section 3 - Configuration
Software - Disk Management - Migrate a Volume
Step 7:
Click a volume and the Migrate button to see the following
window.
The windows allows you to change the RAID level of the
volume. Choose a RAID level and select the hard disks to
be used in the migration.
The wizard allows you to change the volume RAID level.
Choose a RAID level and select the hard disks to be used in
the migration.
To migrate a volume to another RAID level, the ShareCenter
Pro requires a volume's disk array and one or more unused
disks to do the migration. The ShareCenter Pro software will
extend the volume capacity after the migration is complete.
Migration can only take place in the following instances:
Standalone to JBOD
Standalone to RAID 0/1/5/6
RAID 1 to JBOD
RAID 1 to RAID 0/5, and 6
Click OK to save the settings.
D-Link ShareCenter Pro 1100-04 User Manual
Click OK to save the
changes
132