Table of Contents
Advertisement
Section 3 - Configuration
Step 1:
Click Disk Management, iSCSI Target
Click the iSCSI LUN button to see the LUN configuration.
Click the Create button to start to create an iSCSI LUN.
Step 2:
Enter the basic iSCSI LUN settings
Name: The LUN name, you can use English letters,
numbers and some symbols like dash '-' , colon ':' and dot ' . ' .
Pre-allocate: Select " Yes" to allocate volume space as the
iSCSI LUN needs; Selec t "No" to do Thin Provisioning. This
has been introduced in a previous section.
Volume: This is the Volume where the iSCSI LUN will be
stored.
Size: The size of the iSCSI LUN is in Gigabytes. If you
choose Pre-allocate as "Yes", you can enter a size from 1 to
the maximum free size of the volume. Otherwise, you can
enter a size from 1 to the volume size. The upper bound
of the possible maximum LUN size is 2043 GB.
Click Next to continue.
D-Link ShareCenter Pro 1100-04 User Manual
155
Advertisement
Table of Contents
