Table of Contents
Advertisement
Section 3 - Configuration
LUN ACL(LUN Access Control List) defines the access permission for the initiators to the LUNs. When you need to create an
access control rule for an initiator, you need to create a new LUN ACL for it to operate. The Default Policy will be applied if the
initators are not on the list. The Default Policy is read/write in iSCSI LUN. You also can edit the Default Policy to Read Only or
Deny.
Step 1:
The Default Policy will always be first ACL on the LUN
ACL table when the iSCSI Target service is enabled.
Click the Create button to create a new LUN ACL for the
initiator.
D-Link ShareCenter Pro 1100-04 User Manual
iSCSI Target - LUN ACL
160
Advertisement
Table of Contents
