D-Link Share Center Pro 1100 User Manual page 152

Section 3 - Configuration
Step 4:
Select None, if you do not wish to create LUN Mapping here
Click Apply.
Map the LUNs to this iSCSI target. You can specify the iSCSI LUN to map, or just create an iSCSI
Target.
NB: iSCSI Target must map one iSCSI LUN at least.
1. None: no map LUN to this target. You can map it later.
2. Create a New LUN: create a new LUN and map it to this iSCSI target.
3. Map Existing LUNs: map existing LUNs to this target.
D-Link ShareCenter Pro 1100-04 User Manual 146