Table of Contents
Advertisement
Section 3 - Configuration
Using the Setup Wizard for Static IP Addresses
Step 5:
The ShareCenter Pro 1100-04 System
Wizard provides information on setting
up your local LAN, VLAN, and Port
Bonding.
Enter the Static IP address, Subnet
Mask, Jumbo Frame, and Gateway
details provided by your systems
administrator. Leave Jumbo Frame
Disabled if your Service Provider does
not support it.
Setup the VLAN settings according to
your virtual LAN.
Enable Port Bonding according to your
specified needs.
Click Next to continue.
Note: If your network environment
is setup with DHCP, select DHCP. If,
however, you are setting up your
network environment using your own
set of IP addresses, select Static IP.
D-Link ShareCenter Pro 1100-04 User Manual
35
Advertisement
Table of Contents
