Disk Management; Hard Drive Configuration - D-Link ShareCenter DNS-340L User Manual

Section 4 - Configuration
To setup the Hard Drive RAID configuration of your ShareCenter, click the Management tab and then the Disk Management
icon. Select the Hard Drive Configuration menu item on the left of the window. This menu will allow you to set the RAID type
and format your hard drives.
Hard Drive
Configuration:
Current Raid Type:
Set RAID type and
Reformat:
Auto-Rebuild
Configuration:
Enable Auto-Rebuild:
Disable Auto-Rebuild:
Manually Rebuild Now:
D-Link ShareCenter DNS-340L User Manual

Disk Management

Hard Drive Configuration

Your ShareCenter hard drives can be configured here
and formatted in various RAID configurations.
If the drives are already formatted the RAID
configuration will be displayed here.
Click this button to launch a wizard that allows you to
select the RAID configuration and format the drives.
If you have chosen RAID 1 as the configuration option,
you can Enable or Disable the Auto-Rebuild function
here using the radio buttons.
Enabling Auto-Rebuild will rebuild a failed RAID 1
drive when a new drive has replaced the failed one.
If you do not want to automatically rebuild drives after
a failure when using the RAID 1 functionality then you
can check this option.
Note: You can still rebuild a drive using the RAID 1
functionality however you must initiate the rebuild
manually.
If Auto-Rebuild is disabled then you can use the
Manual Rebuild option by clicking this button.
80