Table of Contents
Advertisement
Section 3 - Configuration
Load the hard drives into the bays. Once the bays are installed, the Create Volume window appears but this only occurs if no
RAID has been created. The ShareCenter Pro 1100-04 immediately recognizes the capacity of the drive(s) and prompts you
to select a RAID level. See Creating Your First Volume in the next section. You can also close this window and use the Setup
Wizard to configure the ShareCenter Pro 1100-04.
Note: If there is only one drive
installed into the system, the device
will act as a standalone drive as no
RAID can be created.
D-Link ShareCenter Pro 1100-04 User Manual
Using the Web UI Part II
27
Advertisement
Table of Contents
