Disk Management; Hard Drive Coniguration - D-Link ShareCenter Pulse DNS-320 User Manual

Section 4 - Coniguration
o setup the Hard Drive RAID coniguration of your ShareCenter Pulse, click on the Management tab and then the Disk
Management icon. Select the Hard Drive Coniguration menu item on the left of the window. This menu will allow you set the
RAID type and format your hard drives.
d Drive: our ShareCenter Pulse hard drive can be conigured
Coniguration and formatted in various conigurations here.
urrent Raid Type: f the drives are already formatted the coniguration
will be displayed here.
et RAID type and lick on this button to launch a wizard to allow you to
Re-Format: select the RAID coniguration and format the drives.
Refer to the section titled "What is RAID?" on page 98.
for more information about RAID.
uto-Rebuild f you selected RAID 1 as the coniguration option
Coniguration: then set the Auto-Rebuild function here using the
radio buttons.
uto-Rebuild: nabling Auto-Rebuild will rebuild a failed RAID 1
drive when a new drive has replaced the degraded
one.
isable Auto-Rebuild: f you do not want to automatically rebuild drives
after a failure when using the RAID 1 functionality
then you can check this option.
Note: You can still rebuild a drive using the RAID 1
functionality however you must initiate the rebuild
manually.
anual Rebuild Now: f you have disabled Auto-Rebuild then you can use
the Manual Rebuild option by clicking this button.
D-Link ShareCenter Pulse DNS-320 User Manual

Disk Management

Hard Drive Coniguration

29