Disk.management; Hard.drive.configuration - D-Link ShareCenter Quattro DNS-345 User Manual

Section 4 - Configuration
To setup the Hard Drive RAID configuration of your ShareCenter, click on the Management tab and then the Disk Management icon. Select the Hard Drive Configuration
menu item on the left of the window. This menu will allow you to set the RAID type and format your hard drives.
Hard Drive
Your ShareCenter hard drives can be configured and
Configuration
formatted in various RAID configurations here.
Current Raid
If the drives are already formatted the RAID configuration will
Type
be displayed here.
Set RAID
Click on this button to launch a wizard that allows you to
type and Re-
select the RAID configuration and format the drives.
Format
Auto-Rebuild
If you have chosen RAID 1-5 as the configuration option,
Configuration
then set the Auto-Rebuild function here using the radio
buttons.
Enable
Enabling Auto-Rebuild will rebuild a failed RAID 1-5 drive
Auto-
when a new drive has replaced the degraded one.
Rebuild
Disable
If you do not want to automatically rebuild drives after a
Auto-
failure when using the RAID 1-5 functionality then you can
Rebuild
check this option.
Note: You can still rebuild a drive using the RAID 1-5
functionality however you must initiate the rebuild
manually.
Manual
If Auto-Rebuild is disabled then you can use the Manual
Rebuild Now
Rebuild option by clicking this button.
D-Link ShareCenter Quattro DNS-345 User Manual
Disk Management
Hard Drive Configuration
51