Disk.management; Hard.drive.configuration - D-Link ShareCenter DNS-320 User Manual

Hide thumbs Also See for ShareCenter DNS-320:
Table of Contents

Advertisement

Section 4 - Configuration
To. setup. the. Hard. Drive. RAID. configuration. of. your. . ShareCenter. Pulse,. click. on. the. Management. tab. and. then. the. Disk.
Management.icon..Select.the.Hard.Drive.Configuration.menu.item.on.the.left.of.the.window..This.menu.will.allow.you.set.the.
RAID.type.and.format.your.hard.drives.
Hard Drive:
Your.ShareCenter.Pulse.hard.drive.can.be.configured.
Configuration
and.formatted.in.various.configurations.here.
Current Raid Type:
If.the.drives.are.already.formatted.the.configuration.
will.be.displayed.here.
Set RAID type and
Click.on.this.button.to.launch.a.wizard.to.allow.you.to.
Re-Format:
select.the.RAID.configuration.and.format.the.drives..
Refer.to.the.section.titled. " What.is.RAID?".on.page.98..
for.more.information.about.RAID.
Auto-Rebuild
If.you.selected.RAID.1.as.the.configuration.option. .
Configuration:
then.set.the.Auto-Rebuild.function.here.using.the.
radio.buttons..
Enable Auto-Rebuild:
Enabling. Auto-Rebuild. will. rebuild. a. failed. RAID. 1.
drive.when.a.new.drive.has.replaced.the.degraded.
one.
Disable Auto-Rebuild:
If. you. do. not. want. to. automatically. rebuild. drives.
after.a.failure.when.using.the.RAID.1.functionality.
then.you.can.check.this.option..
Note:.You.can.still.rebuild.a.drive.using.the.RAID.1.
functionality.however.you.must.initiate.the.rebuild.
manually.
Manual Rebuild Now:
If.you.have.disabled.Auto-Rebuild.then.you.can.use.
the.Manual.Rebuild.option.by.clicking.this.button.
D-Link DNS-320 User Manual
Disk Management
Hard Drive Configuration
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents