Connecting Power To The Oscilloscope - Keysight Infiniium S Series User Manual

1
Setting Up the Oscilloscope

Connecting Power to the Oscilloscope

Table 2
Power
Connect the power cord to the side of the oscilloscope, then to a suitable AC
voltage source. Route the power cord so the oscilloscope's feet do not pinch the
cord.
The power cord is the disconnecting device for Mains. Position the equipment so
the power cord is easily reached by the operator.
Use only the power cord that came with the oscilloscope.
CAUTION
The power cord provided is matched to the country of origin of the order.
To avoid electric shock, be sure the oscilloscope is properly grounded.
WARNING
16
Power requirements
100-120 V, 50/60/400 Hz
100-240 V, 50/60 Hz
380 W Max
Keysight Infiniium S-Series Oscilloscopes User's Guide