Adjusting the Horizontal Settings
Use the horizontal controls to configure the horizontal scale and horizontal
position of the waveform. You can view a magnified section of the waveform using
the zoom window.
To adjust the horizontal scale and position, use gestures on the touch screen or
use the horizontal knobs, horizontal controls, or Horizontal dialog box.
Adjusting the Horizontal Scale
Set horizontal scale
(time per division)
Figure 13 Horizontal knobs and controls
• The horizontal scale knob is the larger of the two horizontal control knobs. To
• Push and turn the horizontal scale knob to change the scaling in finer (Vernier)
• You can also use multi-touch gestures to stretch or shrink the waveform.
• To adjust the horizontal scale using the controls in the horizontal toolbar,
Adjusting the horizontal trigger position (delay)
• The horizontal position knob is the smaller of the two horizontal control knobs.
Keysight Infiniium S-Series Oscilloscopes User's Guide
Access the
Horizontal dialog box
stretch the waveform horizontally (displaying fewer seconds per division), turn
the knob clockwise. To shrink it horizontally, turn the knob counter-clockwise.
increments.
mouse over or touch the horizontal scale field and use the resulting controls to
set a particular horizontal scale. Click the scale field to enter an exact value, or
click the "narrower" or "wider" buttons.
Turn the knob to move the waveform to the right or left.
Turn Zoom mode on/off
Set horizontal position
(delay)
2
Using the Oscilloscope
35