Displaying Graphs - Elcometer 224 User Manual

R

8 DISPLAYING GRAPHS

8.1 BAR GRAPH (MODEL B & T)
The Bar Graph displays an analogue representation of the thickness
value together with the highest, lowest and average reading as
measurements are taken. To display the Bar Graph:
1 Press the Display softkey and select "Readings & Bar Graph"
4
If a reading is outside set limits, the white bar and the reading value
turn red.
8.2 RUN CHART (MODEL T)
To display the Run Chart of the last 20 readings:
1 Press the Batch softkey
2 Select "New Batch" or "Open Existing Batch"
3 Press the Display softkey and select "Readings & Run Chart".
4
Red points signify a reading outside the batch's limits (if set).
8.3 BATCH GRAPH (MODEL T)
To display the Batch Graph:
1 Select the appropriate batch name from Batch/Review Batch
2 Select "Batch Graph".
4
Red columns signify a reading outside the batch's limits (if set).
4
Press the Zoom softkey followed by ç or è to review individual readings as required.
7 www.elcometer.com