Table of Contents
Advertisement
3.3.2.5 Height-adjustable sliding
handles
The height of the sliding handles (Fig.
9.3) can be variably adjusted. The han-
dles can also be secured against twist-
ing and pulling out of position
For variable height adjustment, loosen
the locking screw (Fig. 9.4/
). And re-
tighten when adjustment is complete.
3.3.2.6 Back stiffening bar
The Impuls XX for heavier users has a
back stiffening bar fitted as standard
(Fig. 9.5/
).
Before folding the wheelchair, the slid-
ing sleeve for locking the back stiffen-
ing bar should be pushed outwards to
the right (Fig. 9.6/
).
24
9.3
1
9.4
1
9.5
1
9.6
3.3.3 Armrest
Warning:
Do not use wheelchair without arm-
!
rests/clothes guards fitted.
Do not lift wheelchair by armrests/
clothes guards.
3.3.3.1 Clothes guard
The clothes guard (Fig. 10/
) can swivel
forwards or backwards over the centre
of the wheel.
The position of the clothes guard can
be adjusted by loosening the fixing
screws (Fig. 10/
).
Re-tighten the fixing screws when ad-
justment is complete.
Warning:
Do not push the clothes guards out-
!
wards when supporting yourself.
3.3.3.2 Non-locking armrest
The standard armrest (Fig. 11) can be
removed by pulling upwards. The arm-
rest is installed by pushing the guide
tubes downwards as far as possible into
the corresponding openings.
1
2
2
10
11
25
Advertisement
Table of Contents
