Assembling The Housing - Barco Prometheus III Installation Manual

Physical installation stand alone cooler
A
Image 5-5
A Portrait Mode with cooling tubes to the top.
B Portrait Mode with cooling tubes down (not authorized)
In landscape mode the cooler must be mounted with the cooling tubes to the left. The other position
(cooling tubes to the right) is not authorized due to technical constraints. Functioning and lifetime of
internal pump could be impacted if the unit is installed in this position.
A
Image 5-6
A Landscape Mode with cooling tubes to the left (only one authorized position).
B Landscape Mode with cooling tubes to the right (not authorized).

5.2 Assembling the housing

Housing parts
The housing parts are delivered as a flat pack and should be mounted together at the customers side.
44 R5906897 /02 Prometheus III
B
B