Table of Contents
Advertisement
Image 5-16
2.
Also make sure that the frame fits behind the clamp (2). If necessary, slide the clamp a little bit in the housing.
Fixate the clamp fully so that it fits behind the rib on the housing.
Drive in a screw (M3) to connect the clamp to the frame.
Repeat for the other side.
3.
Place the support for the middle bracket on the frame as indicated.
Drive in the fixation screw (M4).
Physical installation stand alone cooler
1
2
R5906897 /02
Prometheus III
51
Advertisement
Table of Contents
