Table of Contents
Advertisement
On servicing
•
Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage potentials and risk of electric shock.
•
Refer all servicing to qualified service personnel.
•
Attempts to alter the factory-set internal controls or to change other control settings not specially discussed
in this manual can lead to permanent damage to the projector and cancellation of the warranty.
•
Remove all power from the projector and refer servicing to qualified service technicians under the following
conditions:
-
When the power cord or plug is damaged or frayed.
-
If liquid has been spilled into the equipment.
-
If the product has been exposed to rain or water.
-
If the product does not operate normally when the operating instructions are followed. Adjust only those
controls that are covered by the operating instructions since improper adjustment of the other controls
may result in damage and will often require extensive work by a qualified technician to restore the
product to normal operation.
-
If the product has been dropped or the cabinet has been damaged.
-
If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original
Barco replacement parts or authorized replacement parts which have the same characteristics as the
Barco original part. Unauthorized substitutions may result in degraded performance and reliability, fire,
electric shock or other hazards. Unauthorized substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this projector, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
1.4 Product safety labels
Light beam related safety labels
Label image
Label description
Hazard RG3: optical radiation warning symbol
WARNING! DO NOT LOOK INTO THE LIGHT
BEAM NO DIRECT EYE EXPOSURE TO THE
BEAM IS PERMITTED. RG3 IEC EN 62471–
5:2015 CLASS 1 IEC EN 60825–1:2014
HAZARD DISTANCE: CONSULT SAFETY
MANUAL
COMPLIES WITH 21 CFR 1040 EXCEPT
WITH RESPECT TO THOSE
CHARACTERISTICS AUTHORIZED BY
VARIANCE NUMBER 2014-V-0285 DATED
APRIL 14, 2016 RISK GROUP 3 LIP IEC
62471:2006
Safety
Label location
R5906897 /02
Prometheus III
15
Advertisement
Table of Contents
