Safety - Fronius Robacta Reamer V Twin Manual

Safety

Safety Observe the following safety rules for all work described in the "Care, maintenance and dis-
posal" section.
Incorrect operation or shoddy workmanship can cause serious injury or damage.
All activities described in these operating instructions may only be carried out by trained
and qualified personnel. All functions described in these operating instructions may only
be used by trained and qualified personnel. Do not carry out any of the work or use any of
the functions described until you have fully read and understood the following documents:
► these operating instructions
► all the operating instructions for the system components, especially the safety rules
Machines that start up automatically can cause serious injury and damage.
In addition to these operating instructions, the safety rules issued by the manufacturers of
the robot and welding systems must also be observed. For your personal safety, ensure
that all protective measures have been taken and will remain in place while you are in the
working area of the robot.
Risk of serious injury from:
► mechanically powered parts
► flying parts (shavings, etc.)
► compressed air/parting agent mixture escaping from the parting-agent injection nozzle
► Before performing work on the cleaning device or any connected system components:
► disconnect the customer compressed air and power supplies from the cleaning device
► ensure that the cleaning device is depressurised - please see the "Ensuring that the
Whenever the cleaning device is supplied with voltage and/or compressed air, a risk
of serious injury exists from:
► rotating cleaning cutter
► lifting device moving up/down
► extending/retracting gas nozzle clamping device
► activated wire cutter
► flying parts (shavings, etc.)
► compressed air/parting agent mixture escaping from the parting-agent injection nozzle
WARNING!
WARNING!
WARNING!
and the connected system components, and ensure that they remain disconnected un-
til work is complete
cleaning device is depressurised" section below for the relevant instructions
WARNING!
61