Robacta Reamer V Twin Control Elements, Connections And Mechanical Components; Controls, Connections And Mechanical Components - Fronius Robacta Reamer V Twin Manual

Robacta Reamer V Twin control elements, connec-
tions and mechanical components
Controls, connec-
tions and me-
chanical
components
Side view
No.
(1)
Risk of damage to standard I/O connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
26
(5)
(4)
(3)
(2)
(1)
Function
Standard I/O connection (X1)
for a 24 V DC supply
CAUTION!
Compressed air connection
for a compressed air supply at 6 bar (86.99 psi)
"Clamp gas nozzle/cleaning motor on" screw
for manually checking the gas nozzle clamping deviceand the cleaning motor (gas
nozzle clamping device extends/retracts, cleaning motor off/on)
"Lifting device up/down" screw
for manually checking the lifting device (lifting device moves up/down)
"Spray parting agent" screw
for manually checking the spray device (compressed air or compressed air/parting
agent mixture is sprayed out of the parting-agent injection nozzle)
Parting agent adjuster
for setting the amount of parting agent applied
Parting agent container
Lifting device
lifts the cleaning motor and the cleaning cutter when cleaning the inside of the gas
nozzle
Cleaning motor with parting-agent injection nozzle
the cleaning motor drives the cleaning cutter
Protective covering
(6)
(7)
Front view
(13)
(12)
(11)
(10)
(9)
(8)