Fitting The Cleaning Cutter - Fronius Robacta Reamer V Twin Manual

Fitting the cleaning cutter

Fitting the clean-
ing cutter
A cleaning cutter that has become very hot through use can cause severe burns.
Before handling cleaning cutters, allow cleaning cutter to cool to room temperature (+25°C,
+77 °F).
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
If other manufacturers' products are used, trouble-free operation of the device cannot be
guaranteed. The manufacturer accepts no liability for damage resulting from the use of oth-
er manufacturers' contact tips, gas nozzles or cleaning cutters.
The cleaning cutter is not part of the scope of supply.
Consult the manufacturer's spare parts list for the appropriate cleaning cutter.
1
1
2
3
36
CAUTION!
NOTE!
NOTE!
Remove the protective covering from the cleaning device
1
Fit the protective covering to the cleaning device in its original position
2