Please read these instructions carefully before use and retain for future
reference.
IMPORTANT SAFETY INFORMATION
•
When using electrical appliances basic safety precautions should always be
followed.
•
Do not use the meter in environments exposed to explosive gas, vapour or dust, in
direct sunlight or high radiation.
•
There are no user serviceable parts in this product. Refer all servicing to qualified
personnel.
•
The voltage detector is designed to be used by skilled persons and in accordance
with safe methods of work.
•
The different indicating signals of the voltage detector (including the ELV limit
indication) are not to be used for measuring purposes.
•
Never use the equipment while the voltage is beyond the range (referring to
technical specification parameters) and above 800V.
•
To ensure normal operation of the tester, measure a known voltage value first.
•
When using the tester always keep your fingers behind the finger safety guards.
•
Do not use the tester if there is a functional failure or no functional indication.
•
Never test in wet conditions.
•
Display functions will only work when the temperature is between -15°C and
+45°C and relative humidity is <85%.
•
Ensure the batteries (not included) are inserted correctly, observing the plus and
minus marks on both the batteries and the compartment.
•
Fit a full set of batteries at one time.
•
Remove dead batteries from the meter, or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
FEATURES
•
LED indication (72-3570 & 72-3575).
•
LCD voltage and frequency display (72-3575 & 72-3580).
•
AC/DC measured up to 690V.
•
Detects a live wire by single test pen measurement.
•
Continuity measurement.
•
Indicates the phase relationships among three-phase AC.
•
Silent mode.
•
Detection without batteries (72-3570 & 72-2375).
•
Torch and backlight.
•
Self-inspection function.
•
Low battery indication and measured voltage over-range indication.
•
RCD test.
•
Automatic standby.
3