Read This First - Panasonic ET-MDNFB10 Operating Instructions Manual

Read this first!

WARNING:
Do not spill water on this product or allow this product to get wet.
Doing so may cause electric shock, fire, or malfunction due to short circuit or overheating.
f Do not place a container with liquid close to this product.
f Consult your dealer when liquid such as water is spilled on this product.
Do not place the supplied port covers and screws in a location that a child can reach.
Accidentally swallowing them can cause a physical harm.
f Seek a medical advice immediately if a child might have swallowed them.
Do not disassemble or modify.
Doing so may cause electric shock or fire. It may also cause a malfunction.
CAUTION:
Do not place this product in a location with excessive humidity or dust, or in a location exposed to oil
smoke or steam.
Doing so may cause fire or electric shock.
Do not place this product in extremely hot location.
Doing so may deteriorate the part, or may cause fire.
f Do not install or store in a location with direct sunlight or close to the heating device, etc.
Disconnect the power plug from the wall outlet before installing or removing this product to/from the
projector.
Failure to do so may cause electric shock.
The SFP module to be attached to this product is a Class 1 laser product. Do not look at the SFP module or
the connector of the optical fiber cable while the projector is turned on. The laser beam may enter the eyes and
cause damage to the eyes.
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Read this first!
ENGLISH - 3