Table of Contents
Advertisement
[MULTI DISPLAY]
Four images can be displayed simultaneously by dividing the projection screen into four.
The multi-display function setting can be saved to [USER1], [USER2], or [USER3].
1)
Select [MULTI DISPLAY] from the main menu.
2)
Press the <ENTER> button.
f The [MULTI DISPLAY] screen is displayed.
3)
Press as to select [MULTI DISPLAY MODE].
4)
Press the <ENTER> button.
f The [MULTI DISPLAY MODE] screen is displayed.
5)
Press as to select a mode from [USER1], [USER2], or [USER3].
[OFF]
[USER1]
[USER2]
[USER3]
6)
Press the <ENTER> button.
7)
Press as to select [UPPER LEFT WINDOW], [UPPER RIGHT WINDOW], [LOWER LEFT WINDOW], or
[LOWER RIGHT WINDOW], and press the <ENTER> button.
f The [UPPER LEFT WINDOW] screen, the [UPPER RIGHT WINDOW] screen, the [LOWER LEFT
WINDOW] screen, or the [LOWER RIGHT WINDOW] screen is displayed.
8)
Press as to select the input terminal to be displayed in the window, and press the <ENTER> button.
[SDI OPT1 [SLOT1]]
[SDI OPT2 [SLOT1]]
[SDI OPT1 [SLOT2]]
[SDI OPT2 [SLOT2]]
[SDI OPT1 [SLOT]]
[SDI OPT2 [SLOT]]
*1 This is displayed when this Interface Board is installed in <SLOT 1>.
*2 This is displayed when this Interface Board is installed in <SLOT 2>.
*3 This is displayed when this Interface Board is installed in <SLOT>.
9)
Press as to select [FRAME LOCK].
10) Press qw to switch the item.
f The items will switch each time you press the button.
[UPPER LEFT WINDOW]
[UPPER RIGHT WINDOW]
[LOWER LEFT WINDOW]
[LOWER RIGHT WINDOW]
Note
f The image currently displayed in the four dividing screen is not projected correctly when the following video signal is input.
g Video signal with resolution exceeding 1 920 x 1 200 dots
g Video signal with dot clock frequency exceeding 162 MHz
g 6G-SDI signal, 12G-SDI signal
f Two input terminals of this Interface Board cannot be selected simultaneously as the input to be displayed in the four-screen display window.
Only one of the input terminals can be selected.
f The appearance may vary for each when an image from one input terminal is displayed on multiple screens.
f The setting value against the input signal set at the upper left screen is applied to all screens as the image adjustment value such as the
[PICTURE] menu → [PICTURE MODE], [GAMMA], or [COLOR TEMPERATURE].
f The movement of the displayed image becomes discontinuous when [FRAME LOCK] is set for the still image signal.
f The movement of the displayed image may become discontinuous for the images where [FRAME LOCK] is not set.
f The setting in the [ADVANCED MENU] menu → [FRAME RESPONSE] is disabled while in the four-screen display mode.
f The setting in the [ADVANCED MENU] menu → [FRAME CREATION] is disabled and fixed to [OFF] while in the four-screen display mode.
f The [ADVANCED MENU] menu → [QUAD PIXEL DRIVE] is fixed to [ON] while in the four-screen display mode.
18 - ENGLISH
Menu navigation
Does not use the multi-display function.
Displays the images in four-screen display with the structure of the input terminals to be set in Step
8).
Sets the input terminal to the SDI OPT1 input of the Interface Board.
*1
Sets the input terminal to the SDI OPT2 input of the Interface Board.
*1
Sets the input terminal to the SDI OPT1 input of the Interface Board.
*2
Sets the input terminal to the SDI OPT2 input of the Interface Board.
*2
Sets the input terminal to the SDI OPT1 input of the Interface Board.
*3
Sets the input terminal to the SDI OPT2 input of the Interface Board.
*3
Sets the frame lock for the input signal set to the upper left window.
Sets the frame lock for the input signal set to the upper right window.
Sets the frame lock for the input signal set to the lower left window.
Sets the frame lock for the input signal set to the lower right window.
Advertisement
Table of Contents
