Table of Contents
Advertisement
●
The effect of the aperture value and shutter speed you have set is not applied to the monitor
image. To check the effect on the monitor image, use Preview Mode. (→62)
●
The brightness of the monitor image may vary from the actual recorded photo. Check its
brightness using the playback screen.
●
When you adjust the aperture value and shutter speed, an exposure setting balance is displayed.
If aperture and shutter speed are shown in red, you do not have an appropriate exposure.
●
If the correct exposure is not achieved when you press the shutter button halfway, the numeric
values of the aperture and shutter speed are displayed in flashing red.
60
Taking Pictures Using the Exposure Control Modes
Recording Modes
,
,
, and
Advertisement
Table of Contents
