●
If the surrounding temperature is high, or a video is recorded continuously, [
recording may be stopped halfway through. Wait until the camera cools down.
●
Note that if you perform operations such as zoom, using buttons or dials, while recording a video,
operation noise may be recorded.
●
If Extended optical zoom is used before pressing the video button, these settings will be cleared,
and the recordable area will be changed significantly.
●
If the aspect ratio is different for pictures and videos, the captured area will change when starting
to record a video.
When you set [Rec Area] to [
●
The zoom speed will be slower than normal during video recording.
●
Depending on the type of the card, the card access indication may appear for a while after
recording video. This is not a malfunction.
●
ISO sensitivity is set to [AUTO] (for video) while a video is being recorded. You can set ISO
sensitivity and record video in Creative Video Mode.
●
The below-mentioned video recording modes are set in the following cases:
[Clear in Backlight]
[Clear Nightscape], [Artistic Nightscape],
[Handheld Night Shot], [Clear Night Portrait]
●
This function is not available in the following cases:
• [Glistening Water], [Glittering Illuminations], [Soft Image of a Flower] (Scene Mode)
• [Rough Monochrome], [Silky Monochrome], [Soft Focus], [Star Filter], [Sunshine] (Creative
Control Mode)
• When [Post Focus] is set
• When using [Time Lapse Shot]
• When using [Stop Motion Animation]
149
], the angle of view setting used for recording videos is displayed.
Selected Scene Mode
Recording Videos
Recording Videos/4K Videos
] is displayed and
Recording mode at the time of
recording videos
Portrait Mode
Low Light Mode