Leica C-LUX Instructions Manual page 230

■
Deleting the pairing information
(On the camera)
Set the menu
→ [Setup] → [Bluetooth] → [Bluetooth] → [SET] → [Delete]
Select the smartphone you want to delete
(On your smartphone)
Select the camera (device name) for which to delete the pairing information from the
[Camera registered] list, and delete the registration.
●
[ ] is displayed on the recording screen when a Bluetooth device is connected. If the Bluetooth
function is enabled, but the smartphone is not connected, the displayed [ ] is semi-transparent.
●
When it takes time to set up pairing between a smartphone and a camera, delete the pairing
information of both devices and register them again. This may enable the devices to be
recognized properly.
●
Up to 16 smartphones can be registered. If you try to register more than 16 devices, the
smartphone with the oldest registration history will be replaced.
●
Performing [Reset Network Settings] will delete registered device information.
Connecting the camera to a smartphone that does not support
Bluetooth Low Energy
Connect to a smartphone via Wi-Fi.
• You can also connect via Wi-Fi to a smartphone that supports Bluetooth low energy by
following the same steps.
Using a password to set up a connection
When [Wi-Fi Password] is set to [ON], you can strengthen security by using manual input
or a QR code for password authentication.
([Wi-Fi Password] is set to [ON] at the time of purchase.)
230
Connecting the camera to a smartphone
Wi-Fi/Bluetooth