Table of Contents
Advertisement
• The settings screen will only appear during the first connection. Connection methods
set on this camera are stored and will be used for subsequent connections. If you
want to change the wireless access point to connect to, press [DISP], then change the
connecting destination.
• WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices. To check if the wireless access point
you are using is compatible with WPS, refer to the instructions of the wireless access
point.
If you are not sure about the WPS compatibility
(connecting by [From List])
Search for available wireless access points.
• Confirm the encryption key of the selected wireless access point if the network
authentication is encrypted.
1
Select the wireless access point you are connecting to
• Pressing [DISP] will search for a wireless access point again.
• If no wireless access point is found, refer to "When connecting
with [Manual Input]". (→251)
2
(If network authentication is encrypted)
Enter the encryption key
• For details on how to enter characters, refer to "Entering Text" (→50)
250
Wi-Fi/Bluetooth
About Wi-Fi connections
Advertisement
Table of Contents
