Leica C-LUX Instructions Manual page 246

Preparation
Install the "Leica C-Lux" app in advance. (→227)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Send Images While Recording] / [Send Images Stored in the Camera]
1
Select [Via Network] or [Direct] to connect (→249, 252)
(On your smartphone)
■
When connecting with [Via Network]
Set Wi-Fi function to "ON"
Select a wireless access point and set
Start the "Leica C-Lux" app
■
When connecting with [WPS Connection] * in [Direct]
Start the "Leica C-Lux" app
*
WPS refers to a function that allows you to easily configure the settings related to the connection
and security of wireless LAN devices. To check if the smartphone you are using is compatible
with WPS, refer to the instructions of the smartphone.
■
When connecting with [Manual Connection] in [Direct]
Set Wi-Fi function to "ON"
Select the SSID displayed on this camera
Start the "Leica C-Lux" app
2
Select the device you wish to connect to
3
Check the send settings, and select [Set]
• To change the send setting, press [DISP]. (→248)
[Send Images While Recording]
4
Take a picture (→247)
[Send Images Stored in the Camera]
4
Select the picture (→248)
●
When [Auto Transfer] in the [Bluetooth] is set to [ON], [Wi-Fi Function] is disabled.
246
Wi-Fi/Bluetooth
Sending pictures to a smartphone