Table of Contents
Advertisement
■
TV, computer, printer
No image appears on the TV. The image is blurred or not colored.
• The connection is not correct (→258).
• The television has not been switched to auxiliary input.
HDTV Link (HDMI) is not working.
• Is the camera's [HDTV Link] setting set to [ON]? (→202)
→ Check the HDTV Link (HDMI) settings on the device you are connecting to.
→ Turn the camera off and on again.
Communication with the computer is not possible.
• Set [USB Mode] to [PC(Storage)] (→201, 263).
• Turn the camera off and then on again.
The computer does not recognize the card. (When using an SDXC Memory Card)
• Check whether your computer is compatible with SDXC Memory Cards.
• A message prompting you to format the card may appear when you connect it. Do not format the
card.
• If the [Access] indicator on the screen does not go off, turn the camera off before disconnecting the
USB cable.
Printing is not possible even though camera and printer are connected properly.
• The printer is not compatible with PictBridge.
• Set [USB Mode] to [PictBridge(PTP)] (→201, 266).
The edges of pictures are cut off when printing.
• Release any trimming or edgeless printing settings on printer before printing.
• The aspect ratio of pictures is different from that of paper used for printing.
→ If printing in shop, check if 16:9 sizes can be printed.
283
Others
Q&A Troubleshooting
Advertisement
Table of Contents
