Leica C-LUX Instructions Manual page 37

■
[ ] Monitor style display layout (Example of monitor style display)
With information
60 p
●
With [Fn Button Set] in the [Custom] ([Operation]) menu, you can assign [EVF/Monitor Disp. Style]
to a function button. Each time you press the assigned function button, the display style of the
monitor or viewfinder ([
■
Using the level gauge
The yellow line indicates the current angle. Correct the angle of the camera so that it
matches the white line.
Tilting up or down
• In this case, it is facing upwards.
• When the camera is level or only very slightly tilted, the level gauge will turn green.
●
Even when no tilt is indicated, there may be an error of about ±1 degree.
●
The level gauge may not be displayed correctly or the direction detect function may not operate
correctly if the pictures are taken with the camera pointing sharply up or down.
37
Buttons/Ring/Dials/Levers Used for Recording
Without information
]/[ ]), whichever is currently in use, will change.
With information
+
level gauge
60 p
Tilting left or right
• In this case, it is tilted to the
right.
Basics
Without information
+
level gauge
Turned off