Leica C-LUX Instructions Manual page 185

[Focus/Release Priority]
You can set whether to give higher priority to focusing or shutter release timing when you
take pictures using Autofocus mode.
You can set the priority for each focus mode ([AFS/AFF], [AFC]) separately.
[FOCUS]
[BALANCE]
[RELEASE]
[Focus Switching for Vert / Hor]
The camera saves the focus positions of a picture separately when it is recorded by
holding the camera vertically and horizontally. The camera saves the following positions
of the picture taken the previous time.
• AF area position (When [
• Position displayed by MF Assist
[Loop Movement Focus Frame]
You can move a focus area from one edge to the opposite edge of the screen in a loop
when the AF area position or MF Assist area display position is set.
[AF Area Display]
You can perform the AF area display setting when the Autofocus Mode is set to [
(49-area-focusing) or Custom Multi.
Displays the AF area on the recording screen.
[ON] • When the default AF area is selected in [
[
Displays the AF area on the recording screen for only a few seconds after the AF area
[OFF]
is set.
●
The [ON] setting operates as [OFF] in the following cases.
• When recording videos
• Creative Video Mode
• When recording 4K photos
185
No picture is taken unless focusing is achieved.
A picture is taken with an appropriate balance between focusing and shutter
release timing.
A picture is taken even if the subject is out of focus.
], [ ] and [
] of Custom Multi-function, the AF area is not displayed.
→ [Custom] →
] are set)
] (49-area-focusing) or [
Using Menu Functions
Menu list
[Focus / Release Shutter]
], [
]
], or