Leica C-LUX Instructions Manual page 251

Table of Contents

Advertisement

When connecting with [Manual Input]
• When connecting by [Manual Input], confirm SSID, network authentication type,
encryption type, encryption key of the wireless access point you are using.
On the screen of step
by [From List])", select [Manual Input]
Enter the SSID of the wireless access point you are connecting to, then select [Set]
• For details on how to enter characters, refer to "Entering Text" (→50)
Select the network authentication type
[WPA2-PSK]
[WPA2/WPA-PSK]
[No Encryption]
(When an option other than [No Encryption] is selected)
Enter the encryption key
Check the wireless access points instructions and settings when saving a wireless access point.
If no connection can be established, the wireless access point's transmission may be too weak.
Refer to "Message displays" (→276) and "Q&A Troubleshooting" (→282) for details.
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
251
1
of "If you are not sure about the WPS compatibility (connecting
Supported encryption methods: [TKIP] / [AES]
Wi-Fi/Bluetooth
About Wi-Fi connections

Advertisement

Table of Contents
loading

Table of Contents