Briggs & Stratton Legacy XL Operator's Manual page 27

Lubrication
Lubricate the unit at the locations shown in Figures
26-28 including the lubrication points listed below. Use
automotive lithium grease or fresh clean engine oil, as
indicated. Keep oil and grease off belts and pulleys. Wipe
surfaces clean before and after lubrication.
Grease:
• Steering linkage
• Foot pedal
• Mower linkage
• Transmission idler assembly pivot
• Rear axle shafts (remove wheel hubs)
• Front axle where it contacts the frame
• All drive shaft universal joints
• Mower belt tension bracket pivots
Oil:
• Control linkage
• Seat adjustment assembly
• Brake linkage
• Mower deck height adjustment linkage
• Manual lift lever
Figure 26
FRONT
Figure 27
Figure 28
27
en