Page 1
Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information. KIT CONTENTS This Kit includes: NOTE Kit PN 2883419 shown; Kit PN 2883840 similar. PART DESCRIPTION PART NUMBER Vehicle Cover Instructions...
ASSEMBLY TIME Approximately 5 minutes INSTALLATION INSTRUCTIONS 1. Shift vehicle transmission into “PARK”. Turn ignition switch to “OFF” position and remove key. 2. Before cover installation: • Examine vehicle for any accessories that extend outside of ROPS or vehicle body to ensure proper fit of cover and prevent damage.
Page 3
5. Secure rear of cover. d. Operate ratchet mechanism until slack is removed, then EXAMINE ALL FOUR TIRES to a. Partially close ratchet ensure strap is positioned BELOW lower tire lugs as shown. Adjust as necessary. b. Thread RH strap through loop on end of center strap.
Page 4
6. Secure middle of cover by connecting male 7. Ensure fuel filler zipper is fully closed. buckles on each end of center strap to female 8. If buffeting occurs during transport then remove or buckles sewn into cover. Tighten strap as adjust cover.