Outside Japan (General) (1/2); Table 2.3 Ac Cable Specifications For The Primequest 520A/520/420; Input Power Supply Unit Connections - Fujitsu PRIMEQUEST 520A Installation Planning Manual

2.4

Input Power Supply Unit Connections

The following table lists the connection specifications for the input power supply unit.
PRIMEQUEST 520A/520/420 main unit (Section
Cables between
Cables between the power distribution box and power distribution panel
(Section
2.4.1 PRIMEQUEST 520A*/520/420 main unit
Table 2.3
PRIMEQUEST 520A*/520/420 main unit.
Table 2.3 AC cable specifications for the PRIMEQUEST 520A*/520/420 main
Destination
JAPAN
Outside Japan
Note: Use the supplied accessory AC cable to connect the main unit.
Do not use the accessory AC cable for other products.
*: not supported by Fujitsu Technology Solutions
U41644-J-Z816-5-76
PCI_Box and power distribution box
2.4.3)
lists the specifications for connecting the input power supply unit to the
Plug type
Two-prong hook-type plug
with grounding electrode
(250V15A) [NEMA
standard name: L6-15P]
Covered 3-pin plug (for
power distribution box
connection) IEC320-C14
type
2.4.1)
(Section
unit
Remarks
The main unit is equipped with one power
distribution box as standard. The power cable
of the main unit is connected to a power
distribution box. Provide a wall-side outlet
(of the power distribution board) according to
the outlet shape given in
"Specifications of the AC cables between the
power distribution box and power distribution
panel."
The main unit is equipped with one power
distribution box as standard. Connect the
power cable of the main unit to the power
distribution box.
(10A-250VAC)
IEC320-C13 type
Laufende K/F 1
2.4.2)
Table 2.5,
2-31