Figure 2.3 Cable Connections (Lan And Other Device Connections) - Fujitsu PRIMEQUEST 520A Installation Planning Manual

Laufende K/F 2
2.2.2 LAN and other device connections
Figure 2.3
Table 2.2
(1) Cable connection diagram
PRIMEQUEST 520A/520/420
series
Fibre Channel card (2G)
Connector type: Duplex
LC connector
Fibre Channel cable connectors are
available in two shape types
(SC and LC).
The type to be used depends on the
cards or devices to be connected.
Prepare a suitable cable after
checking the type of equipment
to be used.
LAN system interface
Gigabit Ethernet card (optical)
Connector type: Duplex LC
10Gigabit Ethernet card (optical)
Connector type: Duplex LC
Gigabit Ethernet card (electricity)
Connector type: RJ45
1Gbp LAN port (IOU)
Connector type: RJ45
The Fibre Channel card, Gigabit
Ethernet card (optical and electricity),
and 10Gigabit Ethernet card (optical)
are mounted in IO Units or in
PCI cassettes of PCI_Boxes.
Remarks:The number in parenthesis corresponds to the number of the cables in

Figure 2.3 Cable connections (LAN and other device connections)

2-8
shows the cable connections for a LAN and other device connections.
lists the applicable cables.
(1)(2)
(1)(2)
(1)(2)
(3)(4)
(3)(4)
2.2.
*1
To *1
To *1
To *2
1000Base-SX
10GBase-SR
10/100/1000Base-T
*3
10/100/1000Base-T
*3
To *3
To *3
To *4
Fibre channel switch
Connector type:
Duplex SC or Duplex LC
*2
Disk array device
Connector type:
Duplex SC or Duplex LC
Gigabit Ether switch
Connector type:
Duplex SC, Duplex LC,
or MTRJ
10Gigabit Ether switch
Connector type:
Duplex SC, Duplex LC
Gigabit Ether switch
Connector type: RJ45
*4
Printer, etc.
Connector type: RJ45
Table
U41644-J-Z816-5-76