Configuring The Server Without Serverview Installation Manager; Notes On Configuring Controllers; General Notes - Fujitsu PRIMERGY RX2540 M6 Operating Manual

Starting up
▶ Open this manual.
▶ For the remote or local installation, follow the instruction in this manual and
on the screen.
▶ Configure the settings for the general system behavior of the server using
the Server Configuration Manager.
5.9 Configuring the server without ServerView
Installation Manager
Configuring the onboard SATA controller and SAS/SATA RAID controller
▶ If applicable, configure the onboard SATA controller, see
configuring controllers" on page
▶ If applicable, configure the SAS/SATA RAID controller with Intel VROC
functionality, see
Installing the operating system
▶ Insert the DVD for the operating system you want to install.
▶ Reboot the server.
▶ Follow the instructions on screen and in the manual for the operating
system.
5.10

Notes on configuring controllers

5.10.1

General Notes

Ensure that the power saving functions are disabled in the Power menu
of the BIOS setup during operation.
80
80.
"Notes on configuring controllers" on page
Operating Manual
"Notes on
80.
RX2540 M6