Table of Contents
Advertisement
Laufende K/F 2
(4) Dual power feed configuration for outside Japan (general)
This section shows the input power system and PSU locations in the PRIMEQUEST
520A*/520/420 containing a Dual Power Feed Option for use outside Japan (general).
For dual power feeding, a dual power feed option is required. This option consists of
a power cable, one PSU, and one power distribution box.
CB:
Circuit breaker (overcurrent protector)
*1:
Power cables (Input#0 to Input#3) are connected to PSUs (PSU#0 to PSU#3)
as shown below, on a one-to-one basis.
*2:
For information about the circuit breakers on the customer's distribution
panel, see
Figure 2.10 Input power system diagram for the PRIMEQUEST 520A*/520/
420 for outside Japan (general) (dual power feed configuration)
*: not supported by Fujitsu Technology Solutions
2-20
Section 2.6, "Circuit Breaker Characteristics."
U41644-J-Z816-5-76
Advertisement
Table of Contents
