Table of Contents
Advertisement
*1:
Power cables (Input#0 to Input#2) of the main unit (PRIMEQUEST 520A*/
520/420) are connected to PSUs (PSU#0 to PSU#2) as shown below, on a
one-to-one basis.
*2:
Each power cable is connected to each output group (including one
overcurrent protector and two outlets) of the outlet box on a one-to-one basis.
Do not connect for redundancy a power cable from a peripheral unit to the
open outlet of the output group to which one power cable is already
connected.
*3:
For information about the circuit breakers on the customer's distribution
panel, see
Figure 2.11 Input power system diagram of the PRIMEQUEST 520A*/520/
420 including the peripherals in a single power feed configuration
*: not supported by Fujitsu Technology Solutions
U41644-J-Z816-5-76
Section 2.6, "Circuit Breaker Characteristics."
(including a redundant PSU) for use in Japan (2/2)
Laufende K/F 1
2-23
Advertisement
Table of Contents
