Fujitsu PRIMEQUEST 520A Installation Planning Manual page 37

Hide thumbs Also See for PRIMEQUEST 520A:
Table of Contents

Advertisement

*1:
This value does not include any projection.
*2:
Value for the case the maximum allowable number of optional units is
mounted.
Value not including the rack-mounting rails and cable management.
*3:
There must be no condensation.
*4:
The temperature requirement depends on the installation altitude.
*5:
"Not operating" means the time when the equipment is stored.
*6:
These values are for each power cable.
*7:
If the intake air temperature is high (within the normal temperature) in
normal operation, the FAN rotate at high speed. [addition according to
the manual errata 2008/09/19]
U41644-J-Z816-5-76
- 5 to 35 °C (41 to 95.0 °F)
[if installed at an altitude of 0 to 1500 m (0 to 4921.2 ft)]
- 5 to 33 °C (41 to 91.4 °F)
[if installed at an altitude of 1500 to 2000 m (4921.2 to 6561.6 ft)]
- 5 to 32 °C (41 to 89.6 °F)
[if installed at an altitude of 2000 to 2500 m (6561.6 to 8202 ft)]
- 5 to 30 °C (41 to 86 °F)
[if installed at an altitude of 2500 to 3000 m (8202 to 9842.4 ft)]
Laufende K/F 1
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 520Primequest 420

Table of Contents