Canon MF4500 Series Service Manual page 132

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass Models with DADF/Models with SADF
3) Remove the reader upper cover [1].
• 2 screws [2]
• 6 claws [3]
Note:
The locations of the 6 claws [3] in the reader upper cover are shown here.
[3]
x2
x6
[3]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass Models with DADF/Models with SADF
×5
×1
F-4-152
[2] [1]
[3]
F-4-153
4) Remove the copyboard glass [1].
Caution:
When assembling/disassembling the copyboard glass, take care not to lose the 2 CIS
unit spacers [1].
When assembling/disassembling the copyboard glass, do not touch the copy reading
area [A] of the CIS unit.
[1]
4-69
[A]
F-4-154
[1]
F-4-155
4-69