Before Removing The Pickup Tray Unit; Single-Sided Models; Mf4410/Mf4412); Removing The Pickup Tray Unit - Canon MF4500 Series Service Manual

4
Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Tray Unit Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
Caution:
Align the 2 boss holes [1], 2 hooks [2] and 2 bosses [3] of the pickup tray unit with the
pickup unit to mount the unit.
[2] [1]
[3]
When assembling the pickup tray unit, check the positioning of the 6 bosses [1] in the
unit.
4 Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Tray Unit Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
[1]
[2]
F-4-363
[1]
F-4-364

Before Removing the Pickup Tray Unit

Single-sided models (MF4450/MF4452/MF4453/
MF4430/MF4420n/MF4410/MF4412)
1) Remove the left cover. (Single-sided models) (Refer to page 4-32)
2-1) Remove the SADF unit and reader unit. (models with SADF) (Refer to page 4-53)
2-2) Remove the copyboard cover and reader unit. (models with copyboard) (Refer to page
4-64)
3) Remove the right cover. (Single-sided models) (Refer to page 4-34)
4) Remove the front cover unit. (Refer to page 4-35)
5) Remove the upper cover. (Refer to page 4-35)
6) Remove the rear cover. (Single-sided models) (Refer to page 4-37)
7) Remove the separation pad. (Refer to page 4-154)

Removing the Pickup Tray Unit

Single-sided models (MF4450/MF4452/MF4453/
MF4430/MF4420n/MF4410/MF4412)
1) Remove the 10 screws [1].
[1]
x10
4-145
[1]
[1]
F-4-365
4-145