2
Technical Overview > Document Exposure/Feeder System > Service Works > Notes on service works
● Jam Detection
The following cases are judged as jam.
1. In case of delay in reaching DS/DES or stationary during scanning of original
2. In case DS/DES is detected as ON at power-on (residual paper jam)
3. In case of detecting original of which length is 400 mm or longer
• Operation after Detection of Jam
The host machine stops scanning operation and displays "CHECK DOCUMENT" on the
control panel. No jam code is displayed. In case of the model equipped with fax function (with
built-in speaker), the warning beep occurs at the detection of jam.
• How to release Jam
Remove the jammed paper and open / close the SADF/DADF upper cover
2
Technical Overview > Document Exposure/Feeder System > Service Works > Notes on service works
Service Works
■ At parts replacement
No work is required for this product at parts replacement.
■ Maintenance
No periodically replaced parts, durable parts or periodical service is set for this product.
■ Notes on service works
None.
2-10
2-10