Canon MF4500 Series Service Manual page 191

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
8) Remove the harness holder [1].
• 1 claw [2]
[2]
9) Remove the shaft support [1] of the delivery roller.
[1]
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412)
[1]
F-4-323
F-4-324
10) Remove the fixing assembly [1].
• 3 screws [2]
[2]
x3
Caution:
When mounting the fixing harness, wrap the fixing harness [2] around the protruding
part [1] of the harness holder, pass it through the harness guide [A], and then mount the
connector [3].
[1]
[2]
[3]
4-128
[1]
[2]
F-4-325
[A]
F-4-326
4-128