4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the CIS Unit Models with DADF/Models with SADF
4) Remove the CIS unit [1].
• 2 shafts [2]
[1]
Caution:
When mounting the CIS unit, align the teeth of the belt [1] to the teeth at the bottom of
the CIS unit [2] to mount the unit.
[1]
[2]
4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the CIS Unit Models with DADF/Models with SADF
[2]
F-4-172
F-4-173
4-75
4-75